Advantages: Good weather resistance: Gel Coat Resin has good weather resistance and can resist the influence of harsh environments such as sunlight, rain, wind and snow, extending the life of FRP products.
Application scenarios: Wind turbine blades: Gel Coat Resin is commonly used in the surface coating of wind turbine blades, which can improve the weather resistance and anti-corrosion properties of wind turbine blades.
| Item No. | Gel Time Min (25℃) | Chemical Category | Product Feature | Application Field |
| RC-283 | 6.5-12.0 | | Good acid resistance, hot water resistance, and good adhesion | A corrosion-resistant resin, a resin for bonding with PVC, and a gel coat matrix resin |
| RC-23W-1 | 10.0-18.0 | Isophthalic | Good construction performance, good heat resistance, water resistance, and crack resistance | Waterproof board, heat-resistant bathtub, general FRP mold gel coat, etc |
| RC-H-2096W | 9.0-14.0 | | High elongation and excellent weather resistance | FRP products |
| RC-H-2096S | 12.0-18.0 | | High elongation and excellent weather resistance | FRP products |
| RC-1240 | 9.0-15.0 (December to next March) | Isophthalic | Good acid resistance, hot water resistance, and good adhesion to rigid PVC (lead type) | A corrosion resin, resin for bonding with PVC, and gel coat base resin |
| 16.0-22.0(from April to November) |
| TR-105 | 7.0-8.0 | O-phthalate | Moderate reactivity and high viscosity | Colored gel coat, and the finished gel coat |
| TR-P50 | | O-phthalate | | Polyester FRP products, artificial agate products, resin handicrafts and so on |
| TR-34 | 5.3-10.0 | O-phthalate | High viscosity and high thixotropic that the gel doesn't flow down | The surface coating of general FRP products |
| TR-86A | 3.5-7.0 | O-phthalate | Excellent strength, toughness and water resistance, weathering resistance | Artificial stone products |
| TR-102 | 4.9-9.1 | Isophthalic | Excellent mechanical properties and weathering resistance | Excellent mechanical properties and weathering resistance |
Note: For more detailed parameters, please contact us at any time.
FAQ
1. How can I get a sample?
Small quality of sample in stock will be free, but the freight will be charged.
2. Are you able to adjust the formula to meet our requirement?
We have our own technical department, after you test the sample, please tell us your detailed requests, we are able to adjust the resin according to your requests, and bring better properties to your finished products.
3. What is the lead time for mass production?
Honestly, it depends on the quantity. We will try our best to make the production plan according to your ETA.
4. What is your terms of payment?
100% full payment for the 1st trial order; from next order, 30% payment in advance, 70% payment after buyer get the B/L copy. We also accept L/C if you need.
yomi@rulecomposite.com
